New 8370R Tractor

Specifications

Engine description	Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Engine displacement	9 L 549 cu in.
Rated engine power	97/68EC: 272 kW 370 hp
Rated PTO power (hp SAE)	233 kW 313 hp
Transmission type	Standard: e23 Powershit with Efficiency Manager™ 40K, 40 km/h 26 mph e23 Powershift with Efficiency Manager™ 50K, 50 km/h 31 mph John Deere AutoPowr™ IVT™ 40K, 26 mph (0.05-42 km/h) John Deere AutoPowr™ IVT™ 50K, 31 mph (0.05-50 km/h)
Hydraulic pump rated output	Standard: 85-cc pump: 227.1 L/min 60 gpm Optional: 85-cc plus 35-cc dual pump: 321 L/min 85 gpm
Rear hitch category (SAE designation)	Standard: Category 4N/3: 9,072 kg (20,000 lb) standard lift at 610 mm behind hitchpoint Optional: Category 4N/3: 6,803 kg (15,000 lb) at 610 mm behind hitchpoint
Base machine weight	ILS/e23: 14,270 kg 31,459 lb
Maximum PTO power
Maximum engine power

Engine type	Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Engine family	JJDXL09.0308
Rated speed	2,100 rpm
Aspiration	Dual series turbocharger with fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders liners
Emission level	Final Tier 4
After treatment type	DOC/DPF/SCR
Displacement	9 L 549 cu in.
Description

Rated power	97/68EC: 272 kW 370 hp
Rated PTO power (hp SAE)	233 kW 313 hp
Power boost	10 percent
Engine peak torque	At 1600 rpm: 1,732 Nm 1,277 lb-ft
PTO torque rise	40 percent
Intelligent Power Management (available in transport and/or mobile PTO applications)
Maximum PTO power
Maximum engine power

Type	Standard: e23 Powershit with Efficiency Manager™ 40K, 40 km/h 26 mph e23 Powershift with Efficiency Manager™ 50K, 50 km/h 31 mph John Deere AutoPowr™ IVT™ 40K, 26 mph (0.05-42 km/h) John Deere AutoPowr™ IVT™ 50K, 31 mph (0.05-50 km/h)
Reverser
Clutch; wet/dry
Creeper

Type	Closed-center, pressure/flow compensated
Pump rated output	Standard: 85-cc pump: 227.1 L/min 60 gpm Optional: 85-cc plus 35-cc dual pump: 321 L/min 85 gpm
Available flow at a single rear SCV	0.5 in. couplers: 132 L/min 35 gpm 0.75 in coupler: 159 L/min 42 gpm
Available flow at front SCVs	96 L/min 25 gpm
Number of rear selective control valves (SCVs)	Standard: 0.5 in. ISO couplers: 9 Optional: 0.5 in. ISO Couplers: 5 and 6 available 0.75 in. ISO couplers: 6
Number of mid selective control valves (SCVs)
Number of front selective control valves (SCVs)
Joystick SCV control
SCV control	Electronic

Hitch draft control load sense type
Remote control valves available
Hitch category (SAE designation)	Standard: Category 4N/3: 9,072 kg (20,000 lb) standard lift at 610 mm behind hitchpoint Optional: Category 4N/3: 6,803 kg (15,000 lb) at 610 mm behind hitchpoint
Maximum lift capacity behind lift points	Standard: 12,124 kg (26,729 lb) at 610 mm behind hitchpoint
Sensing type	Electrohydraulic
Rear axle differential lock
Lift capacity at standard frame

Drawbar category	Standard: Category 4 Optional: Category 4 with heavy duty support
Maximum vertical load	4,990 kg 11,000 lb

Type	Independent Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm Optional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
Engine rpm (at rated PTO speeds)	IVT: 1,000 PTO rpm at 2,000 engine rpm 1,000 ECO PTO at 1594 engine rpm 540 PTO rpm at 1,814 engine rpm e23 PST: 1,000 PTO rpm at 1,995 engine rpm 1,000 ECO PTO at 1,590 engine rpm 540 PTO rpm at 1,810 engine rpm
PTO actuation
Ground speed PTO option availability
Multispeed PTO option availability

Category	Category 3N
Electric power
Standard lift capacity	Category 3N ground engaging front hitch: 5,200 kg (11,464 lb) lift capacity
Front power take-off (PTO)	44 mm (1.75 in) 20 spline, 1,000 rpm 35 mm (1.375 in) 21 spline, 1,000 rpm 35 mm (1.375 in) 6 spline, 1,000 rpm (available dependent on location)
PTO speed	1,000 PTO rpm at 2000 engine rpm

Type	Standard: Rack-and-pinion, double flat, or flange axles Optional: Long, dual taper hub: Diameter: 120 x 3010 mm 4.72 x 118.5 in. Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm 4.72 x 100.4 in.
Final drive type	Inboard planetary three pinion
Differential controls
Axle type
Brakes, type and control
Rear differential lock	Full-locking electrohydraulic
Load rating

Type	Standard: ILS Optional: 1500 Series MFWD
Front axle differential lock	1500 Series MFWD: Full-locking electrohydraulic ILS: Full-locking electrohydraulic
Load rating

Front
Rear
Wheel tread range	1500 Series MFWD: 1,524-3,657 mm 60-144 in. ILS: 1,524-3,657 mm
Turning radius with brakes
Turning radius without brakes	ILS with 380/85R34 group 42 tires at 60 in. spacing,

Type	Standard: Hydraulic power-steering with electric pump back-up Optional: ActiveCommand™ Steering (ACS) with electric pump back-up

Alternator size	Standard: 200 amp
Battery options	12 V
Total cold cranking amps	1,850 CCA
Type of bulb in beacon (Halogen, Zenon, LED)
Type of bulb in headlight (Halogen, Zenon, LED)
Working lights
dB(A) rating for backup alarm

Rollover protective structure, OOS
Seat	Standard: ComfortCommand™ Optional: ActiveSeat™
Cab suspension	Optional
Instructional seat	Standard
Display	Standard: 4100 Generation 4 CommandCenter™ with 7 in. display Optional: 4600 Generation 4 CommandCenter™ with 10 in. display
Radio	Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume	3.597 m3 127 cu ft
dB(A) rating
Cab glass area	6.52 m2 70.18 sq ft
Front visibility
Safety glass rating

Wheelbase	MFWD: 3,080 mm 121.3 in. ILS: 3,050 mm 120.1 in.
Overall length	6,636 mm 261.3 in.
Drawbar clearance	376 mm 14.8 in.
Front axle center	MFWD: 686 mm 27 in. ILS: 590 mm 23.2 in.
Approximate shipping weight, Open;Cab
Overall height

Base machine weight	ILS/e23: 14,270 kg 31,459 lb
Maximum ballast level	SAE PTO kW: 88.6 kg SAE PTO hp: 145 lb
Maximum permissible weight

Crankcase oil volume	1500 MFWD: 28 L 7.4 U.S. gal. ILS: 27.5 L 7.3 U.S. gal.
Fuel tank	Group 47/48: 615 L 162.5 U.S. gal. Group 49: 676 L 178.6 U.S. gal.
Diesel exhaust fluid (DEF) tank	23 L 6 U.S. gal.
Cooling system	32.6 L 8.6 U.S. gal.
Transmission-hydraulic system	MFWD: 140 L 37 U.S. gal. ILS: 165 L 43.6 U.S. gal.

Interval for engine oil change	500 hours
Interval for hydraulic/transmission oil change	1,500 hours
Interval for engine coolant change	6,000 hours

Loader	H480
Lift capacity at full height	2,486 kg 5,469 lb measured at 800 mm ahead of pivot
Maximum lift height	4,735 mm 186 in.

Guidance	AutoTrac Ready
Telematic	Available with JDLink™ hardware, activations, and Ethernet Harnesses (availability dependent upon destination)
Remote diagnostics	Available with activated JDLink™ hardware and activations

Country of manufacture	USA
Side slope rating
Uphill/downhill slope rating

Drive type
Midrollers
Track width
Tread spacing